Description
AOK 20SSFC has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed airsystem. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and when the level is high enough condensate is being discharged from the system without any air losses. Direct acting valve is operated by precise level controlled floater which assures reliable and efficient operation. Thanks to robust stainless steel housing AOK 20SSFC is suitable for heavy duty applications. On front side AOK 20SSFC is also equipped with separate manual drain or venting.
Applications
- Air Compressor (piston or screw)
- After-cooler
- Cyclone condensate separator
- Pressure vessel/Air tank
- Air Dryer
- Air Filter
Technical Specification
| Operating temperature | 1,5 – 120 °C (35 – 248 °F) |
| Operating pressure | 0 – 20 bar (g) 0 – 290 psi |
| Min. recommended operating pressure | 1,5bar (g) 21,8 psi |
| Operating media | Condensate (air, water, oil); Non-aggressive |
| Nominal discharge capacity | 167 l/h (at 7 barg) 252 l/h (at 16 barg) |
| Discharge orifice cross cection | 1,8 mm (0,0708 inch) |
| Inlet connection | G 1/2″ (NPT on request) |
| Outlet connection | G 1/2″ (NPT on request) |
| Reservoar volume | 0,4 l |
| Weight | 5,835 kg |
| Valve type | Direct acting, normally closed |
Materials
| Housing material | Stainless Steel 1.4404 |
| Fittings, Screws | Stainless Steel 1.4404 |
| Floater | Stainless Steel 1.4404 |
| Sealing | FKM |
