Description
AOK50SSFC has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air(1) system. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and when the level is high enough condensate is being discharged from the system. Direct acting valve is operated by precise level controlled floater which assures reliable and efficient operation. Thanks to resistance stainless steel housing AOK50SSFC for heavy duty applications. On front side AOK50SSFC is also equipped with separate manual drain or venting.
Applications
- Air Compressor (piston or screw)
- After-cooler
- Cyclone condensate separator
- Pressure vessel/Air tank
- Air Dryer
- Air Filter
Technical Specification
Operating temperature | 1,5 – 65°C (35 – 149°F) |
Operating pressure | 8 – 50bar (g) 101 – 725 psi |
Normally open | <1 barg |
Normally closed | <8 barg |
Min. recommended operating pressure | 10 bar (g) 145 psi |
Operating media | Condensate (air, water, oil); Non-aggressive |
Nominal discharge capacity | 145l/h (at 50barg) |
Discharge orifice cross cection | 1,8 mm (0,0708 inch) |
Inlet connection | G 1/2″ (NPT on request) |
Outlet connection | G 1/2″ (NPT on request) |
Reservoar volume | 0,45 l |
Weight | 7,2 kg |
Valve type | Servo, normally open |
Materials
Housing material | Stainless Steel 1.4404 |
Fittings, Screws | Stainless Steel 1.4404, A4 |
Floater | Polyamide (PA6) |
Sealing | NBR, FPM |