CS/CS SS Series – Welded Condensate Separators (16 bar)

Description

CS – Carbon Steel

CS SS – Stainless Steel

CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.

Operating Pressure: 16 bar

Technical Data:

Filter Model	Filter Model	Pipe Size	Max. Oper. Pressure	Flow rate at 7 bar (g), 20ºC		Temperature Operating Range
Carbon Steel	Stainless Steel	DN	bar/psi	Nm³/h	scfm	ºC	ºF
CS 14	CS SS 14	65	16/232	840	495	1,5 – 65	35 – 149
CS 28	CS SS 28	80	16/232	1710	1005	1,5 – 65	35 – 149
CS 62	CS SS 62	125	16/232	3720	2190	1,5 – 65	35 – 149
CS 88	CS SS 88	150	16/232	5280	3110	1,5 – 65	35 – 149
CS 124	CS SS 124	200	16/232	7440	4380	1,5 – 65	35 – 149
CS 238	CS SS 238	300	16/232	14,280	8404	1,5 – 65	35 – 149

Dimensions:

CS 238	CS SS	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]
CS 14	CS SS 14	613	153	302	45	1/2’’
CS 28	CS SS 28	745	182	302	35	1/2’’
CS 62	CS SS 62	1041	280	390	37	1/2’’
CS 88	CS SS 88	1298	330	489	50	1/2’’
CS 124	CS SS 124	1506	436	619	52	1/2’’
CS 238	CS SS 238	1673	504	805	91	1/2’’

Correction factors:

Operating pressure [bar]	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20
Operating pressure [psi]	29	44	58	72	87	100	115	130	145	160	174	189	203	218	232	247	261	276	290
Correction factor	0.38	0.5	0.63	0.75	0.88	1	1.13	1.25	1.38	1.5	1.63	1.75	1.88	2	2.13	2.25	2.38	2.5	2.63

Condensate Drains:

 

 

 

 

 

Accessories: