Description
The NM-GEN membrane nitrogen generators extract the available nitrogen from the compressed air. Generator use hollow fiber membrane technology to separate nitrogen from other components in compressed air. The membrane uses the principle of selective permeation to produce purity nitrogen. Each gas has a characteristic permeation rate, which is a function of its ability to diffuse through a membrane.
Oxygen is a fast gas and is selectively diffused through the membrane wall, while nitrogen is allowed to travel along the inside of the fiber, thus creating a nitrogen-rich product stream. The oxygen-enriched gas, or permeate, is vented from the membrane separator at atmospheric pressure. The driving force for the separation is the difference between the partial pressure of the gas on the inside of the hollow fiber and that on the outside. In the membrane separator, compressed air flows down the inside of hollow fibers. Fast gases—oxygen, carbon dioxide, and water vapor – and a small amount of slow gases, pass through the membrane wall to the outside of the fibers. They are collected at atmospheric pressure as the permeate. Most of the slow gases and a very small amount of the fast gases continue to travel through the fiber until they reach the end of the membrane separator, where the product nitrogen gas is piped to the application.
Applications
- Blanketing of Chemicals and Pharmaceuticals
- Inerting of Flammable Liquids
- Laser Cutting
- Re-flow and Wave Soldering of PCBs
- UB Curing of Coatings
- Food processing
Technical Data
| Nitrogen pressure | 5– 24 barg |
| Operating temperature (feed air) | 35 °C to 55 °C |
| Dew point (at ambient pressure) | better than -50°C |
| Voltage, Frequency | 110–230 V / 50–60 Hz |
| Power consumption | <35 W |
| Sound Level | 65 dB(A) |
| Protection class (controller) | IP 65 |
| Compressed air quality (inlet) | Class 1.X.1 acc. to ISO 8573-1 (0,1um ; bellow saturation ; <0,01mg/m3/h) |
| Inline Filter | Super fine coalescing and activated carbon |
Materials
| Membrane Housing | Aluminium and (or) PA |
| Supporting frame | Carbon Steel |
| Valves | Brass, aluminium |
| Flexible connection | Nylon |
| Fittings, Screws, Plugs | INOX, brass, steel-zinc plated, PA |
| Outside protection (frame, cabinet) | Powder paint coated (Epoxy-polyester base) |
Sizes and Performance
See PDF
Standard Equipment
- Set of External Feed Air Filters
- Electric heater
- Supporting frame or cabinet
- Pressure regulator
- Internal Piping
- Nitrogen and Air flow Regulation
Optional Equipment
- Nitrogen Sterile Filters
- Nitrogen Booster
- Nitrogen Culinder Filling System
