Description
EMD HPFC series drain have been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air(1) system. The units can be installed as external drain on any application specified below. Condensate accumulates in the collecting reservoir and when the level is high enough condensate is being discharged from the system without any air losses. Fluid level
is detected by precise capacitive level sensor. Special self cleaning direct acting valve assures reliable operating. EMD HPFC series is also equipped with operation alarm (versionA), led indicator, test button and internal strainer. Version with Service Network (version C) for diagnostics and parameter setting is also available. Working hours, valve operations and other operating parameters are stored in internal memory and can be read with Service Network reader.
Applications
- Air Compressor (piston or screw)
- After-cooler
- Cyclone condensate separator
- Pressure vessel/Air tank
- Air Dryers
- Air Filters
Technical Specification
| Type | EMD HPFC (230 V) | EMD HPFC (115V) |
| Service Network Connection | No | No |
| Alarm Output | No | No |
| Voltage | 230VAC, 50-60Hz | 115VAC, 50-60Hz |
| Internal Fuse | 5×20 1A T | 5×20 1A T |
| Power | 25VA | 25VA |
| Operating pressure range | 0-50 bar / 0-725 psi | 0-50 bar / 0-725 psi |
| Drain Capacity Kv | 30,4 l/h @ 50 bar, 0.018 cfm@ 725 psi – 4,3 (l/h) / √bar | 30,4 l/h @ 50 bar, 0.018 cfm@ 725 psi – 4,3 (l/h) / √bar |
| Operating temperature range | 1,5°C – 65°C | 1,5°C – 65°C |
| Protection class | IP54 | IP54 |
| Inlet connection | G 1/2″ (parallel thread) | G 1/2″ (parallel thread) |
| Outlet connection | G 1/4″ (parallel thread) | G 1/4″ (parallel thread) |
| Mass | 2.3kg | 2.3kg |
Materials
| Reservoir | Aluminium |
| Strainer Mesh | Stainless Steel |
| Valve | Brass, Stainless Steel 1.4305 |
| Level Sensor | PP (polypropylene) |
| Sealing | NBR |
