SFH/SFH SS Series – Welded Condensate Separators (16 bar)

Description

SFH/SFH SS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH/SFH SS cyclone separator it is essential to install automatic or electronic condensate drain.

Operating Pressure: 16 bar

Technical Data:

Filter Model	Filter Model	Pipe Size	Max. Oper. Pressure	Flow rate at 7 bar(g), 20º C		Temperature		Mass (kg)
Carbon Steel	Stainless Steel	DN	bar/psi	Nm³/h	scfm	ºC	ºF
SFH 029	SFH SS 029	80	16/232	1760	1024	1,5 – 65	35 – 149	33
SFH 037	SFH SS 037	100	16/232	2200	1307	1,5 – 65	35 – 149	45
SFH 066	SFH SS 066	125	16/232	3940	2331	1,5 – 65	35 – 149	58
SFH 088	SFH SS 088	150	16/232	5300	3108	1,5 – 65	35 – 149	81
SFH 097	SFH SS 097	200	16/232	5820	3426	1,5 – 65	35 – 149	107
SFH 142	SFH SS 142	250	16/232	8520	5015	1,5 – 65	35 – 149	207
SFH 180	SFH SS 180	300	16/232	10770	6357	1,5 – 65	35 – 149	280
SFH 209	SFH SS 209	350	16/232	12,550	7381	1,5 – 65	35 – 149	379

Dimensions:

A [mm]	B [mm]	C [mm]	D [mm]	E [inch]
720	400	165	219	1/2”
890	460	236	244	1/2”
980	550	250	273	1”
1040	570	250	300	1”
1110	690	265	350	1”
1330	800	360	480	1”
1470	820	408	550	1”
1670	920	471	622	1”

Correction Factors:

Operating pressure [bar]	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20
Operating pressure [psi]	29	44	58	72	87	100	115	130	145	160	174	189	203	218	232	247	261	276	290
Correction factor	0.38	0.5	0.63	0.75	0.88	1	1.13	1.25	1.38	1.5	1.63	1.75	1.88	2	2.13	2.25	2.38	2.5	2.63

Condensate Drains:

 

 

 

 

 

Accessories: